top of page
SILICONE ROOF COATING

The Process
Applying 100% Silicone Roof Coating
-
Clean roof surface with a power washer, preparing it to receive coating. Use a minimum of 2,000 psi of water pressure. Making sure all loose dirt and debris is removed.
-
Once roof is dry, make any necessary repairs to drains, seams, flashings, and fasteners to get them in good working condition.
-
Perform adhesion tests and, if necessary, apply a primer to your roof to improve coating adhesion.
-
After making repairs, apply coating at the proper rate for your roof type. Use a medium nap roller to spread the coating out as evenly as possible.
-
Clean all tools and equipment with mineral spirits.
-
White Silicone is best for UV & heat factors. Nine colors available
bottom of page